Exetel customer help forum

Wartai wrote:i redone all settings from factory and all is working now

Good to hear you are making and receiving calls.

Wartai wrote: Port forwarded is 5060
the registration: Registration State: Online (this what u mean ?)

When you access the PAP2T in your web browser, eg 192.168.X.XXX/admin/advanced,
then on the 'info' page it tells you your registration status.
You also probably need RTP ports 16384 - 16482 forwarded as well.

Not sure if i should post it on this thread, but topic was about dialing problem Im using a Linksys PAP2T ATA with Billion 7402 router (on ADSL2+ Naked), ports are forwarded............ Is your Billion 7402 a voip router? Does it have 'V' after the 7402? What are the port numbers that you have forw...

It's not really an issue, I am interested more than anything why I would get 12mbit to Auckland NZ when I only get 8.5 to 9mbit to Sydney which is only 50 miles away. Of course the ping times to Auckland are higher. I get similar discrepancies, must be the optusnet server. Try the server at Tuggera...

Ok Thanks, I will keep you updated.

Nothing changed my end, Have a look at the ping now; :\Documents and Settings\XXXXXX>tracert 220.233.0.9 Tracing route to candlenut-web.exetel.com.au [220.233.0.9] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.254 2 * * * Request timed out. 3 35 ms 37 ms 38 ms 10.0.1.33 4 36 ms 36 ms 35 m...

Usually my connection is very good. BUT tonight there is something drastically wrong. Ping, tracert C:\Documents and Settings\XXXXXXX>ping http://www.exetel.com.au Pinging http://www.exetel.com.au [220.233.0.9] with 32 bytes of data: Request timed out. Reply from 220.233.0.9: bytes=32 time=377ms TTL...

himagain wrote:Hopefully somewhere out there is a 7301 user who succeeded...... somewhere???

Have you tried my suggestion;
http://forum.exetel.com.au/viewtopic.ph ... 31#p262982

7301VGP - bought especially for the job......... The wizard is part of the browser interface - not sure what other option you mean here?? What solution are you suggesting? 7301, Well that's why it does not have 'User defined profiles', Check out this page, Half way down the settings will be the sam...

If it helps, you can use the following dial plan: |<:0011612>[89]xxxxxxx|<02:0011612>[89]xxxxxxx| which replaces 02 with / or adds 0011612. Hmmm! Would this also be applied to Pennytel in the gateway which I use to dial overseas? NO, as it only applies to your Line 1 account. With your dial plan of...

himagain wrote: CAn't find it anywhere - only option is to select a pre-configured provider under "voip wizard" no way to enter anything or add another provider I can see in my Billion ......

"No way to enter anything" Hmmmm, incorrect.
Try entering your details under 'User defined Profiles'

......Something you may be unaware of (unless you've read through the whole thread) is that pennytel works Ok from both line 1 and in the gateway. Exetel voip will ring and connect to mobile phones. ..... According to your configuration file, provisioning is set up to pennytel. Is this ATA of yours...

Sorry but I missed this post, no probs with pennytel in the gateway and now I've removed exetel as line 1, penntel is working normally there as well. Can't try exetel in the gateway as calls need registering. Sounds good then, your hardware and setup must be working fine. Exetel seem to be working ...

Dazzled wrote: You can test this by disabling QoS and seeing if the voice degrades instead, .............

I might be wrong here, but I understand this Netgear modem does not have QOS for voip.

MikeW wrote:Clearly there is something at the Exetel end as too many are finding this happening. .

http://forum.exetel.com.au/viewtopic.php?f=58&t=34201