Search found 60 matches

by fosfet
Fri May 04, 2012 2:36 pm
Forum: VOIP
Topic: one way audio for incoming calls
Replies: 46
Views: 8712

Re: one way audio for incoming calls

Outbush, I thought i would pm you the ata settings file, but pm's do not seem to allow for attachments. The file type is not allowed to be attached (at the forum level) in any case. The RTP port being used increments by 2 every time I ring the phone. Always an even number. So I guess the logical sta...
by fosfet
Sat Apr 28, 2012 6:36 pm
Forum: VOIP
Topic: one way audio for incoming calls
Replies: 46
Views: 8712

Re: one way audio for incoming calls

Dazzled, Maybe. He Sent me one to “try” Of course in the security interest of all w35 users, I will have to keep this a state secret to my grave. Ownership seems to be a fluid concept these days. I understand you have had 'one way audio problems' in the past and that 'Exetel Voice' solved them, obvi...
by fosfet
Fri Apr 27, 2012 5:50 pm
Forum: VOIP
Topic: one way audio for incoming calls
Replies: 46
Views: 8712

Re: one way audio for incoming calls

Understood that you have tried it before, even I tried it before and the service gave me the same one way audio issue :roll: . But when I tried again yesterday with G711a only, it worked :o . Hence please check again if it is not too much to ask. No trouble, and I did try it (xlite) again with G711...
by fosfet
Wed Apr 25, 2012 9:37 pm
Forum: VOIP
Topic: one way audio for incoming calls
Replies: 46
Views: 8712

Re: one way audio for incoming calls

Outbush; With the web server settings, there is not an option for a range of port forwards, they have to be individually selected. So forwarding such a large number is impractical. In any case, my (possibly wrong) understanding is that once the ata has access via 5060, it can then assign any others ...
by fosfet
Wed Apr 25, 2012 9:23 pm
Forum: VOIP
Topic: one way audio for incoming calls
Replies: 46
Views: 8712

Re: one way audio for incoming calls

Hi Lodperera,

Please note from my first post:
Also tried xlite and it had the exact same problem
However, please note that I have not set port forwards for xlite, as I do not know which port xlite uses.
by fosfet
Tue Apr 24, 2012 8:14 pm
Forum: VOIP
Topic: one way audio for incoming calls
Replies: 46
Views: 8712

Re: one way audio for incoming calls

Dazzled, I'm up for some internal poking. The tech reference states I can check the signal strength of 3 transmitters at once. I find that irresistible. And good for antenna pointing. When I get the time I will check the Viking's website for the appropriate tool. Jokkin, Well that is funny. I have f...
by fosfet
Mon Apr 23, 2012 8:40 pm
Forum: VOIP
Topic: one way audio for incoming calls
Replies: 46
Views: 8712

Re: one way audio for incoming calls

Hi Jokiin, I think you will be disappointed:
nat_shot.png
nat_shot.png (92.21 KiB) Viewed 3271 times
Reading the manual before dinner, i see there is a much larger selection of tweakables available via some telnet interface that I currently have no knowledge/software/instructions for.

tim
by fosfet
Mon Apr 23, 2012 5:58 pm
Forum: VOIP
Topic: one way audio for incoming calls
Replies: 46
Views: 8712

Re: one way audio for incoming calls

Hi Dazzled, Your input is welcome regardless. The w35 is an excellent product. Only downside was the price, but maybe they are cheaper now. 1) Never did use a static ip as the router always assigns the same address. 2) Logs – good idea. Managed to perform a “problem” call. Nothing at listed for the ...
by fosfet
Sun Apr 22, 2012 8:13 pm
Forum: VOIP
Topic: one way audio for incoming calls
Replies: 46
Views: 8712

one way audio for incoming calls

After more than several years of near excellent voip service, in the last couple of weeks, a problem has developed with annoying regularity. For incoming calls, audio goes out, but there is nothing coming in. (I cannot hear the caller). The ATA as an early linksys pap2. I limited the codec to G711a ...
by fosfet
Wed Sep 22, 2010 3:45 pm
Forum: HSPA connections
Topic: New HSPA Plans
Replies: 59
Views: 10250

Re: New HSPA Plans

The REAL cost of the service we currently provide is 1.95 cents per megabyte PLUS $4.40 monthly access. Exetel is currently paying $101.90 for the 5gb I will use this month? And a general item I have long wondered; Some time back some senior telstra managment were scoffing at NBN1, and stating that...
by fosfet
Wed Aug 11, 2010 4:22 pm
Forum: VOIP
Topic: Engaged outgoing calls
Replies: 10
Views: 1463

Re: Engaged outgoing calls

had the same problem for the last 2 months with my PAP2T, i couldnt call out, i had an engaged tone soon as i picked up the phone... Hi Wartai, This is different to the problem I was having. Mine was billion registration like. I gave up on the changes, thinking the problem was probably at the exete...
by fosfet
Wed Jul 21, 2010 11:01 am
Forum: Anything else anyone wants to discuss
Topic: John's Indecision
Replies: 1
Views: 1418

John's Indecision

Don't know if this belongs here, but anyhow........ From John's blog: Any way - if anyone has any brilliant marketing ideas  - please let me know - I don't think I have the kind of imagination that is suited to marketing methodologies. There are numerous reasons why I use and recommend exetel. High ...
by fosfet
Thu Jul 15, 2010 4:58 pm
Forum: VOIP
Topic: Emergency Network Maintenance
Replies: 0
Views: 393

Emergency Network Maintenance

There will be emergency network maintenance performed to remove
suspect equipment from the network
Is there any suspicion that this will fix my voip?

tim
by fosfet
Fri Jul 09, 2010 8:27 am
Forum: VOIP
Topic: Engaged outgoing calls
Replies: 10
Views: 1463

Re: Engaged outgoing calls

This was my situation as well, which is why I set up the faktortel account.

tim
by fosfet
Thu Jul 08, 2010 2:17 pm
Forum: VOIP
Topic: Engaged outgoing calls
Replies: 10
Views: 1463

Re: Engaged outgoing calls

Has this issue been solved - I seem to be having the same problem. In a fashion. I set up a faktortel account on the spare port of the ATA and am using that when the exetel voip stops. In other news.......... I have tried various settings on the ATA, after scouring the manual. There has been no not...