Page 1 of 1

IPv6 Availability for Residential Users

Posted: Wed Jul 15, 2015 4:50 pm
by squarefanatic
Has Exetel made any progress in making IPv6 available to residential customers?

Re: IPv6 Availability for Residential Users

Posted: Wed Jul 15, 2015 5:00 pm
by angelos
squarefanatic wrote:Has Exetel made any progress in making IPv6 available to residential customers?
Please refer viewtopic.php?f=15&t=37716&p=312110&hilit=IPv6#p309668

Re: IPv6 Availability for Residential Users

Posted: Wed Jul 15, 2015 5:15 pm
by squarefanatic
angelos wrote:
squarefanatic wrote:Has Exetel made any progress in making IPv6 available to residential customers?
Please refer viewtopic.php?f=15&t=37716&p=312110&hilit=IPv6#p309668
While not really IPv6, and just a kludge, how does a Residential customer go about setting up 6to4? Can you point me to documentation on the Exetel website.

Thanks!

Re: IPv6 Availability for Residential Users

Posted: Wed Jul 15, 2015 5:34 pm
by angelos
squarefanatic wrote:
angelos wrote:
squarefanatic wrote:Has Exetel made any progress in making IPv6 available to residential customers?
Please refer viewtopic.php?f=15&t=37716&p=312110&hilit=IPv6#p309668
While not really IPv6, and just a kludge, how does a Residential customer go about setting up 6to4? Can you point me to documentation on the Exetel website.

Thanks!
Unfortunately we do not have a documentation for this. As on the referred thread if you need this you may drop an email to corporatesupport@exetel.com.au with your service number, contact details and your requirement we can advise you further.

Re: IPv6 Availability for Residential Users

Posted: Wed Jul 15, 2015 5:49 pm
by squarefanatic
angelos wrote:
Unfortunately we do not have a documentation for this. As on the referred thread if you need this you may drop an email to corporatesupport@exetel.com.au with your service number, contact details and your requirement we can advise you further.
Done!

Re: IPv6 Availability for Residential Users

Posted: Thu Aug 18, 2016 6:25 pm
by dleonard0
squarefanatic wrote:
angelos wrote: Unfortunately we do not have a documentation for this. As on the referred thread if you need this you may drop an email to corporatesupport@exetel.com.au with your service number, contact details and your requirement we can advise you further.
Done!
Squarefanatic, did anything come of your enquiry?

Edit: I was waiting on a reply from an email to residentialsupport, but managed to figure this out myself in the meantime. The Exetel 6to4 gateway is reachable at its RFC3068 address (192.88.99.1). I had success setting up a 6in4 tunnel using local addreess 2002:wwxx:yyzz::1/64 (where wwxxyyzz is the hex form of my static IP address). I needed to add a default v6 route to 2002:wwxx:yyzz::/128. Also I set up my LAN as 2002:wwxx:yyzz:8000:: (rtadvd) and it all "just worked".

Re: IPv6 Availability for Residential Users

Posted: Sat Oct 22, 2016 12:35 pm
by DeeCeeOne
hey there are you able to assist me, i am trying to do what you wrote but i am having a bit of troubles. :) thank you

Re: IPv6 Availability for Residential Users

Posted: Sat Oct 22, 2016 11:01 pm
by Kaushalya
DeeCeeOne wrote:hey there are you able to assist me, i am trying to do what you wrote but i am having a bit of troubles. :) thank you
We will check on this and respond to you shortly. Your reference number is 10857346.