Having some issues with an 837, that I'd dearly love to use as once they're working, they're a touch more reliable than the alternatives. The hard part is getting them there Router is at Version 12.2(8r)YN, RELEASE SOFTWARE (fc1) if relevant / required.
So far, I have been able to configure the modem for outbound access to the 'net, but have not been able to either get the modem to retain its settings after a reload/power cycle, nor am I able to publish inbound services. I DONT know what I'm doing with Cisco, but have managed to cobble together the following configuration. Any assistance with rectifying this would be greatly appreciated. The functionality required: inbound specfic published services, outbound any/all access (with the option to filter if required/possible).
Internal IP addressing has been changed to 1.2.3 instead of what it actually is, it is a valid internal IP space.
Code: Select all
no service pad service timestamps debug uptime service timestamps log uptime service password-encryption hostname slnit512 logging queue-limit 100 enable secret ########## ip subnet-zero no ip domain lookup ip audit notify log ip audit po max-events 100 vpdn enable vpdn-group pppoe request-dialin ip name-server 18.104.22.168 ip name-server 22.214.171.124 bridge irb interface Ethernet0 no shutdown description LAN ip address 126.96.36.199 255.255.255.0 ip nat inside no keepalive hold-queue 32 in hold-queue 100 out interface ATM0 no shutdown no ip address no atm ilmi-keepalive dsl operating-mode auto interface ATM0.1 point-to-point no shutdown description WAN pvc 8/35 pppoe-client dial-pool-number 1 interface Dialer1 no shutdown ip address negotiated ip nat outside encapsulation ppp dialer pool 1 dialer-group 1 ppp chap hostname ##########@vic.exetel.com.au ppp chap password ########## ip nat inside source list 1 interface Dialer1 overload ip nat inside source static tcp 188.8.131.52 25 interface Dialer1 25 ip nat inside source static tcp 184.108.40.206 443 interface Dialer1 443 ip nat inside source static tcp 220.127.116.11 80 interface Dialer1 80 ip classless ip default-network 0.0.0.0 ip route 0.0.0.0 0.0.0.0 Dialer1 ip route 18.104.22.168 255.255.255.0 Ethernet0 access-list 1 permit any dialer-list 1 protocol ip permit bridge 1 protocol ieee bridge 1 route ip scheduler max-task-time 5000