I have a Netcomm NB9W with Exetel NAKED ADSL2 which works perfectly with an old wired phone but when connecting the 2 different brands of cordless phones that I have tried both fail. I have tested the cordless phones on diffrent Voip enabled routers using them to make Voip calls, with no problems.
The symptoms are the same for both cordless phones:
Incoming Call: When answering the call the caller can hear us but we can't hear them. After hanging up, there is no dial-tone and no further incoming calls can be recieved after that and the router has to be rebooted. The Internet connection is fine all the time with no drop-outs.
Outgoing Call: There is no dial-tone at all so no out-going calls can be made. Once an outgoing call is attempted the line is dead and the router needs to be rebooted to get a dial-tone again.
As stated before, none of these problems are present when using the wired phone.
Modem setup, reviews and questions (All brands, including wireless modems)
2 posts • Page 1 of 1
- Volunteer Site Admin
- Posts: 5922
- Joined: Sat Nov 04, 2006 2:24 pm
- Location: Melbourne, VIC
In order to keep things organised, it is best to stick to one thread. I suggest you use http://forum.exetel.com.au/viewtopic.php?f=58&t=33134 for your main thread.