Wollongong Outage - 8:53am

Connection issues, drop outs or speed related faults for ADSL and ADSL2+ services
Post Reply
AITCS
Posts: 39
Joined: Wed Mar 07, 2007 9:28 am
Location: Wollongong

Wollongong Outage - 8:53am

Post by AITCS » Thu Jan 29, 2015 9:22 am

Experiencing a dropout of connection starting 8:53am (router does not observe DST timestamps).
Looks like the connection was dropped and no server is currently available to process authentication requests.
Any ideas?
My system is in constant isolation. No use for land line phone here, so modem is direct plugged into the main wall socket.
Jan 29 07:53:56 pppd[387]: Connection terminated.
Jan 29 07:53:56 pppd[387]: Modem hangup
Jan 29 07:53:57 WAN Connection: Fail to connect with some issues.
Jan 29 07:53:57 stop_nat_rules: apply the redirect_rules!
Jan 29 07:54:10 pppd[387]: Connected to 00:30:88:1d:72:c7 via interface eth0
Jan 29 07:54:10 pppd[387]: Connect: ppp0 <--> eth0
Jan 29 07:54:40 pppd[387]: No response to PAP authenticate-requests
Jan 29 07:54:40 pppd[387]: Connection terminated.
Jan 29 07:54:51 pppd[387]: Connected to 00:30:88:1d:72:c7 via interface eth0
Jan 29 07:54:51 pppd[387]: Connect: ppp0 <--> eth0
Jan 29 07:55:21 pppd[387]: No response to PAP authenticate-requests
Jan 29 07:55:21 pppd[387]: Connection terminated.
Jan 29 07:55:31 pppd[387]: Connected to 00:30:88:1d:72:c7 via interface eth0
Jan 29 07:55:31 pppd[387]: Connect: ppp0 <--> eth0
Jan 29 07:56:02 pppd[387]: No response to PAP authenticate-requests
Jan 29 07:56:02 pppd[387]: Connection terminated.

angelos
Exetel Staff
Posts: 1068
Joined: Fri Nov 09, 2012 11:22 pm
Location: Australia

Re: Wollongong Outage - 8:53am

Post by angelos » Thu Jan 29, 2015 9:26 am

We are currently facing an ougoing issue in NSW.

Please refer : viewtopic.php?f=296&t=41686

If you're in NSW you may be affected by this. Apologies for the inconvenience

AITCS
Posts: 39
Joined: Wed Mar 07, 2007 9:28 am
Location: Wollongong

Re: Wollongong Outage - 8:53am

Post by AITCS » Thu Jan 29, 2015 9:31 am

Thanks for the quick reply... at least I know it's not at my end.
Connection appears to be back up now. Hopefully stable :)

Post Reply