I am going to replace my modem with new TP Link WD-9977 modem router.
Any setup guide for Exetel account can be located?
Thanks
Install new modem router - setup guide
Re: Install new modem router - setup guide
Unfortunately we don't have the exact modem setup guide for this model. However you may find similar models on http://exewiki.exetel.com.au/index.php? ... tup_Guides . Further I have sent you a generic email which contains the account details you need from Exetel to configure the new modem to your nominated email address ......@yahoo.com.au .ManUtdFans wrote:I am going to replace my modem with new TP Link WD-9977 modem router.
Any setup guide for Exetel account can be located?
Thanks
Re: Install new modem router - setup guide
Well what about generic settings? I have also installed a new modem and am having a hard time finding generic settings for Exetel's ADSL2 (like PPPoE or PPPoA, etc). If the settings are on the main website, I would like a link because I couldn't find it.
I have found some settings on this forum from over 6 years ago, but for all I know it's outdated.
thanks
I have found some settings on this forum from over 6 years ago, but for all I know it's outdated.
thanks
Re: Install new modem router - setup guide
Refer the link http://exewiki.exetel.com.au/index.php? ... figuration and check the information under " How do I configure my modem for ADSL? " for the basic settings.Prizm wrote:Well what about generic settings? I have also installed a new modem and am having a hard time finding generic settings for Exetel's ADSL2 (like PPPoE or PPPoA, etc). If the settings are on the main website, I would like a link because I couldn't find it.
I have found some settings on this forum from over 6 years ago, but for all I know it's outdated.
thanks
Re: Install new modem router - setup guide
Which setting is for which supplier?Please use below settings based on your ADSL supplier to configure your ADSL modem.
AAPT/Powertel
- VPI - 8
- VCI - 35
- Protocol - PPPoE
- Encapsulation - LLC
- VPI - 8
- VCI - 35
- Protocol - PPPoA
- Encapsulation - LLC
- VPI - 8
- VCI - 35
- Protocol - PPPoA
- Encapsulation - VC-MUX
Telstra and Optus
- VPI - 8
- VCI - 35
- Protocol - PPPoE
- Encapsulation - LLC
- VPI - 8
- VCI - 35
- Protocol - PPPoA
- Encapsulation - VC-MUX
Re: Install new modem router - setup guide
Supplier AAPT/Powertel recommended below.Prizm wrote:Which setting is for which supplier?Please use below settings based on your ADSL supplier to configure your ADSL modem.
- VPI - 8
- VCI - 35
- Protocol - PPPoA
- Encapsulation - VC-MUX[
Supplier Telstra and Optus recommended below.
- VPI - 8
- VCI - 35
- Protocol - PPPoE
- Encapsulation - LLC