Technical question

'Fax to Email' and 'Email to Fax' services
Post Reply
Macko
Posts: 21
Joined: Mon Mar 19, 2007 2:07 pm
Location: Binnaway

Technical question

Post by Macko » Mon Dec 03, 2007 2:00 pm

The instructions on the facilities page state: address your fax to "destination fax"@fax.exemail.com.au

The bit in bracket, is that the fax number concerned? E.g. if you want to fax something to fax no. 12345678 then 12345678@fax.exemail.com.au, without brackets? Or with brackets?

Same question for the subject. If my password for the fax page is "exetelaretops", do I just type the password itself as subject or embedded between brackets? Just want to get it right.

Thanks.

William M
Posts: 510
Joined: Wed Mar 21, 2007 1:28 pm

Post by William M » Mon Dec 03, 2007 2:23 pm

It is your details without the brackets.

Eg. 12345678@fax.exemail.com.au

Macko
Posts: 21
Joined: Mon Mar 19, 2007 2:07 pm
Location: Binnaway

Post by Macko » Mon Dec 03, 2007 2:31 pm

Thank you. And you guys ARE tops.

hornet48
Posts: 144
Joined: Tue Nov 06, 2007 9:03 pm

Post by hornet48 » Thu Dec 06, 2007 5:57 pm

I imagine it is best to use area codes (07, 02, etc.).

Does the system assume NSW as the "default" state for 8-digit numbers?

Regards,

Harry.

JamesR
Posts: 424
Joined: Sun May 06, 2007 10:20 am

Post by JamesR » Fri Dec 07, 2007 7:55 am

I believe you have to include the area code in every fax you send to make it successful.

I cannot verify this, but it still costs the same and what's stopping you from adding two extra digits to the number anyway?
Regards,

JamesR
Customer since 2005

ForumAdmin
Exetel Staff
Posts: 3663
Joined: Sun Jan 04, 2004 2:31 pm
Location: Sydney

Post by ForumAdmin » Fri Dec 07, 2007 8:26 am

hornet48 wrote:I imagine it is best to use area codes (07, 02, etc.).

Does the system assume NSW as the "default" state for 8-digit numbers?

Regards,

Harry.
There is no default State. You must include the area code.

Post Reply