No VoIP today...

[Tafkam]

My VoIP isn't working at all today. I haven't changed anything. I'd appreciate any help....

CODEC: G.729A/B(8Kbps) I tried the G.711
PACKET SIZE: 20ms I tried 40ms
VOICE ACTIVE DETECTOR: Off
DTMF MODE: Outband (RFC2833)
PAYLOAD TYPE: 101
DYNAMIC RTP PORT START: 10050
DYNAMIC RTP PORT END: 15000
RTP TOS: IP Precedence 5
In PORT SETTINGS it's set to "Auto" under "Register via" and "Stun Server" is not ticked.

[slwarren75]

Hi,

My VOIP has also stopped working today. I have not made any changes. My Linksys ATA is showing a status of "Registration State: Failed"

Steve

[Tafkam]

Mine says IDLE, then "Processing" when I try to ring, but nothing connects or rings or anything.

[dengdeng]

Hi,

My VOIP has also stopped working today. I have not made any changes. My Linksys ATA is showing a status of "Registration State: Failed"

Steve

My Linksys ATA has the same problem, also my X-PRO software can't register either, showing "Login time out, contact Network Admin".
Must be something wrong with server, have a look below, I can't even ping server:

D:\Documents and Settings\Administrator>ping 58.96.1.2

Pinging 58.96.1.2 with 32 bytes of data:

Reply from 220.233.0.234: TTL expired in transit.
Reply from 220.233.0.234: TTL expired in transit.
Reply from 220.233.0.234: TTL expired in transit.

Ping statistics for 58.96.1.2:
Packets: Sent = 3, Received = 3, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

[Tafkam]

Hopefully one of the staff can look into it for us....

[Tafkam]

OK I just tried it again, and now I'm actually getting a busy signal.....from EVERYONE.

[JamesR]

http://forum.exetel.com.au/viewtopic.php?f=219&t=26912

[Tafkam]

Thanks James. At least we know....

[James D]

The voip service should be coming back online now.

[ssyt99]

my voip is still down. Anyone else or just me?

edit: it is working now after I restart the modem