Have been using a Billion router for years with Exetel VOIP, no dramas.
Unfortunately, it recently died - and I've cobbled together a replacement setup with backup Netcomm modem, Linksys WAP and Linksys PAP2-NA for VOIP.
I have the PAP2 configured, registered and making outbound calls.
It is not receiving inbound calls, calls go direct to the exetel voicemail prompt - messages left are successfully received in my email inbox.
I can't dial 121 from the analog phone.
And when I dial out, by default it appears to dial NSW numbers, as opposed to 03 Vic numbers. (The billion didn't require the 03 prefix).
I read on the troubleshooting page there is some info on dialling 121 via a Linksys box, ie
Code: Select all
If you have problems calling 121 (Voicemail) you will need to modify the dial plan to the one listed below and change one setting. Use Preferred Codec Only to "no". (*xx|000S0<:@gw0>|<#0,:>xx.<:@gw0>|xx.)
Any help appreciated!