Hi there,
Has anyone been able to configure a Cisco UC320w successfully with Exetel VOIP?
The VOIP services register but after a couple of seconds the registration fails (see attached pictures).
Both SIP1 & SIP2 are Exetel DIDs.
Both have got NAT Mapping & NAT Keep Alive on and have the Static external IP set.
Any help is much appreciated.
Kind regards,
Edwin
Cisco UC320w with Exetel VOIP (SOLVED)
Cisco UC320w with Exetel VOIP (SOLVED)
- Attachments
-
- SIP Trunk configuration
- Screen shot 2011-11-09 at 10.18.32 PM.png (69.41 KiB) Viewed 1367 times
-
- Registration failed
- Screen shot 2011-11-09 at 10.17.41 PM.png (41.79 KiB) Viewed 1367 times
-
- Registration successful
- Screen shot 2011-11-09 at 10.17.25 PM.png (42.42 KiB) Viewed 1367 times
Last edited by Edwin on Thu Nov 10, 2011 3:37 pm, edited 1 time in total.
Re: Cisco UC320w with Exetel VOIP
Never mind, I've worked out what was wrong.
This device is behind a pfSense firewall which had a port forward for all SIP traffic to a different internal IP address (our previous VOIP device).
All good and working perfectly
This device is behind a pfSense firewall which had a port forward for all SIP traffic to a different internal IP address (our previous VOIP device).
All good and working perfectly