Page 1 of 1
VOIP Setup for D-Link DVA2800
Posted: Sun Nov 01, 2020 8:47 pm
by Lowga
Hi,
I have recently purchased a D-Link DVA2800 Modem Router to replace a faulty Netcomm NF18ACV and I have the DSL connection up and running but can't get the VOIP service running. I have searched for Exetel VOIP setup guides for this hardware without success.
I have used many of the same settings from the Netcomm modem and still can't establish a connection. Any help would be appreciated.
Regards,
Graham.
Re: VOIP Setup for D-Link DVA2800
Posted: Mon Nov 02, 2020 9:49 am
by nilushid
Lowga wrote: ↑Sun Nov 01, 2020 8:47 pm
Hi,
I have recently purchased a D-Link DVA2800 Modem Router to replace a faulty Netcomm NF18ACV and I have the DSL connection up and running but can't get the VOIP service running. I have searched for Exetel VOIP setup guides for this hardware without success.
I have used many of the same settings from the Netcomm modem and still can't establish a connection. Any help would be appreciated.
Regards,
Graham.
Hi Graham
We do not have a setup guide for your Dlink modem. You will need to refer to the modem manuall or contact the D-Link support desk to get help with the configuration. However, you can refer to the following link if you need more information about Exetel VoIP services.
https://exewiki.exetel.com.au/index.php?title=VoIP
If you have any further conserns, please PM your customer ID or the service number to check on this further.
Thanks
Re: VOIP Setup for D-Link DVA2800
Posted: Wed Nov 04, 2020 3:02 pm
by Dazzled
Here's a D-Link DVA2800 solution from another ISP's customer -
http://users.on.net/~alanholder/modem/fixed.jpg
Replace the internode address with sip1.exetel.com.au. You could consider 3600 registration expiry time. Your user name is the ten digit phone number.
